Dental implants are all the rage. And why not — not only are these tooth replacements life-like and highly functional, they have an amazing 95% ten-year success rate.
Some of that success is due to their unique design. Technically a root replacement, an implant's metal titanium post is surgically placed in the jawbone, where bone grows and adheres to it over time. This creates a strong connection that stands up well to the forces created by biting and chewing.
But there's more to their longevity than design. Success also depends on a careful, planned process that begins long before surgery.
It starts with a detailed oral examination to determine the best placement for the implant. Besides regular x-rays, we may also perform CT scans to create a three-dimensional view of your jaw. With this we can locate and avoid nerves, sinus cavities or other structures near the implant site.
The examination also helps us determine if you've experienced any bone loss, a normal occurrence after tooth loss. Implants require an adequate amount of bone to achieve the best position. A good position ensures future bone integration and the best appearance result.
The same attention to detail extends to the actual surgery to place the implant. We fashion the site to receive the implant by sequentially drilling larger tapered channels until we achieve the right size fit for the implant. During drilling we avoid overheating the bone, which could ultimately weaken and damage the implant's stability.
We'll also need to provide protection for the implant while it integrates with the bone. In most implantations, we do this by suturing the gum tissue over the implant. We take a different approach with a “Tooth in a Day” procedure where we attach a crown (the visible portion of the tooth) right after implant surgery. In this case we'll install a crown (which is actually temporary) that's a little shorter than the adjacent teeth. The natural teeth around it will absorb the forces produced while chewing and not the implant crown.
Focusing on these and other factors will greatly reduce the risk of implant failure. Paying careful attention to them helps ensure your new smile is a lasting one.
If you would like more information on dental implants to restore your smile, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants: A Tooth Replacement Method That Rarely Fails.”
Do you wake up in the morning still feeling tired? Are you drowsy, irritable or have difficulty concentrating? And is your snoring habit a running joke around your household?
If you mostly answered yes, you may have obstructive sleep apnea (OSA). This condition is more than an irritation—it could also have major health implications if not addressed.
OSA occurs when the airway becomes temporarily blocked during sleep. The tongue (or other mouth structures like tonsils or the uvula) is often the cause as it relaxes and covers the back of the throat. Although you’re asleep, the brain notices the drop in oxygen and initiates arousal to unblock the airway. As this action usually only takes a few seconds, you may not fully awake every time; but because it can occur several times a night, it can rob you of the deep sleep you need for well-being.
If you’re diagnosed with OSA, your doctor may recommend continuous positive airway pressure therapy (CPAP). This treatment uses a pump device to supply continuous pressurized air through a hose connected to a face mask worn during sleep. The elevated pressure helps keep the airway open.
While this approach is quite effective, many people find wearing the equipment uncomfortable or confining, and may choose not to use it. If that describes you, a qualified dentist may be able to provide you with an alternative called oral appliance therapy (OAT).
OAT uses a custom-made plastic oral appliance you wear while you sleep. The most common snaps over the teeth and uses a hinge mechanism to move the lower jaw (and the tongue with it) forward.
OAT is recommended for people with mild to moderate OSA, or those with severe symptoms who can’t tolerate CPAP. If you’d like to see if an OAT appliance could help you, contact us for a complete oral examination. Either treatment can improve your sleep and daily lifestyle, as well as help prevent certain health issues in the future.
If you would like more information on treatments for sleep apnea, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Oral Appliances for Sleep Apnea.”
Everyone loves a concert where there's plenty of audience participation… until it starts to get out of hand.Â Recently, the platinum-selling band Fifth Harmony was playing to a packed house in Atlanta when things went awry for vocalist Camila Cabello. Fans were batting around a big plastic ball, and one unfortunate swing sent the ball hurtling toward the stage — and directly into Cabello's face. Pushing the microphone into her mouth, it left the “Worth It” singer with a chipped front tooth.
Ouch! Cabello finished the show nevertheless, and didn't seem too upset. “Atlanta… u wild… love u,” she tweeted later that night. “Gotta get it fixed now tho lol.” Fortunately, dentistry offers a number of ways to make that chipped tooth look as good as new.
A small chip at the edge of the tooth can sometimes be polished with dental instruments to remove the sharp edges. If it's a little bigger, a procedure called dental bonding may be recommended. Here, the missing part is filled in with a mixture of plastic resin and glass fillers, which are then cured (hardened) with a special light. The tooth-colored bonding material provides a tough, lifelike restoration that's hard to tell apart from your natural teeth. While bonding can be performed in just one office visit, the material can stain over time and may eventually need to be replaced.
Porcelain veneers are a more long-lasting solution. These wafer-thin coverings go over the entire front surface of the tooth, and can resolve a number of defects — including chips, discoloration, and even minor size or spacing irregularities. You can get a single veneer or have your whole smile redone, in shades ranging from a pearly luster to an ultra-bright white; that's why veneers are a favorite of Hollywood stars. Getting veneers is a procedure that takes several office visits, but the beautiful results can last for many years.
If a chip or crack extends into the inner part of a tooth, you'll probably need a crown (or cap) to restore the tooth's function and appearance. As long as the roots are healthy, the entire part of the tooth above the gum line can be replaced with a natural-looking restoration. You may also need a root canal to remove the damaged pulp material and prevent infection if the fracture went too far. While small chips or cracks aren't usually an emergency (unless accompanied by pain), damage to the tooth's pulp requires prompt attention.
If you have questions about smile restoration, please contact us and schedule an appointment. You can read more in the Dear Doctor magazine articles “Porcelain Veneers: Strength & Beauty As Never Before” and “Porcelain Crowns & Veneers.”
The primary goal of dental care is to preserve teeth. But there are circumstances in which removing a tooth, even a relatively healthy one, could prove best in the long run.
A malocclusion (poor bite) related to crowding might fit such a circumstance. Crowding occurs when the size of the jaw is too small for the teeth coming in. With not enough space, some teeth could erupt out of their proper positions. Removing certain teeth frees up space to eventually allow braces or other orthodontic devices to re-align the teeth.
The teeth most frequently removed are the first bicuspids, located between the cuspid (the "eyeteeth" directly under the eyes) and the back teeth, and the second premolar. Removing these won't normally affect appearance or functionality once orthodontic or cosmetic treatments are complete.
Because of the mechanics of jaw development it might be necessary to perform these extractions several years before orthodontic treatment. This could create another potential problem: the time lag could adversely affect bone health.
This is because bone, as living tissue, has a life cycle with cells forming, functioning and then dissolving, and new cells taking their place. When teeth are chewing or in contact with each other they generate force that travels through the tooth roots to the bone and stimulates cell growth at a healthy replacement rate.
But when a tooth is missing, so is this stimulation. This slows the replacement rate and eventually leads to decreased bone volume. Too much bone loss could create obstacles for orthodontic treatment or a future dental implant.
To avoid this, the dentist will often place a bone graft with processed bone mineral within the empty tooth socket right after extraction. The graft serves as a scaffold for bone cells to grow upon. The graft (plus any other added growth boosters) can help maintain a healthy level of bone volume to facilitate future orthodontic or restorative treatments.
Since targeted extraction for orthodontics is time-sensitive, you should have your child's bite evaluated by an orthodontist by age 7 to see if any action is necessary. The earlier a malocclusion is detected, the more likely a more attractive and healthy smile will be the ultimate outcome.
If you would like more information on correcting poor bites, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Tooth Removal for Orthodontic Reasons.”
While we often associate tooth decay with cavities forming in a tooth’s visible or biting surfaces, the occurrence of this all too common disease isn’t limited to those areas. Cavities can develop in any part of a tooth exposed to bacteria.
Gum recession, the shrinking back of the gums from the teeth, can cause such exposure in areas normally covered by the gums. Because these areas are usually more vulnerable to infection when exposed, cavities can develop at or right below the gum line. Because of their location it can be difficult to fill them or perform other treatments.
One way to make it less difficult is to perform a crown lengthening procedure. While the term sounds like we’re increasing the size of the tooth, we’re actually surgically altering the gums to access more of the affected tooth surface for treatment. It’s typically performed in a dental office with local anesthesia by a general dentist or a periodontist, a specialist in the gums.
During the procedure, the dentist starts by making small incisions in the gums to create a tissue “flap” that can be lifted out of the way. This exposes the underlying bone, which they then reshape to support the gum tissue once it’s re-situated in its new position. The dentist then sutures the gums back in place. Once the gums heal, the decayed area is ready for treatment.
Crown lengthening is also useful for other situations besides treating cavities. If a tooth has broken off at the gum line, for example, there may not be enough remaining structure to support a crown. Crown lengthening can make more of the underlying tooth available for the crown to “grab” onto. It’s also useful in some cases of “gummy smiles,” in which too much of the gum tissue is visible in proportion to the tooth size.
Because crown lengthening often involves removing some of the bone and is thus irreversible, you should discuss this procedure with your dentist in depth beforehand. It could be, though, this minor procedure might make it easier to preserve your teeth and even make them look more attractive.
This website includes materials that are protected by copyright, or other proprietary rights. Transmission or reproduction of protected items beyond that allowed by fair use, as defined in the copyright laws, requires the written permission of the copyright owners.